The Frank furniture series makes a straightforward statement. Each of the three designs is strongly contemporary while able to complement traditional settings. The products are accessible and inclusive, offering higher seats and longer armrests to provide support for those less able. Crafted in recyclable sand-cast aluminium, Frank combines sustainability and style.
Length: 160 cm
Width: 48 cm
Height: 48 cm
| U16-24/UA | Frank Bench |
| B11-06 | Startup cost for powder coating steel in a color other than standard. Choose a RAL colour. |
If no letter is entered after the article number, gray top-glazed pine is obtained. NCS S 5502-B.
C for any color other than standard, starting cost is added.
Noir 2200 Sablé (black).
C for any color other than standard, starting cost is added.
Nola's pine is of high quality and comes from sustainable forestry. Pine is an environmentally friendly, domestically produced material. Damaged or untreated pine is quite easily attacked by decomposition processes; therefore, it is particularly important to repair damaged surfaces.
Our FSC-labeled Jatoba is an untreated, very hard, and strong hardwood with a long shelf life. It has a brown color with black accent stripes that changes to a deep and rich red color over time.
FSC-marked mahogany is a wood with good durability in the outdoor environment. In addition, it retains its color tone better than, for example, oak and teak. Mahogany lives and moves, sometimes more than teak.
Oak is a heavy, hard and medium tough wood. Moderately dimensionally stable in case of moisture changes. Oak wood blackens if it is exposed to moisture or wetness for a long time. However, it does not affect the other properties of the wood. Thanks to its hardness and toughness, the oak wood is suitable for furniture and other use in exposed environments.
Aluminium recycled from scrap, hand cast in sand moulds. The energy consumption when producing recycled aluminium is about 5% of that used when producing virgin aluminium.
Varnishing of wood is done with a water-based varnish. A water-based paint that is kinder to the environment. Under normal use, the paint has a good wear resistance and long durability.
Wood oil provides good protection against the stresses of the outdoor climate and at the same time highlights the wood's natural appearance and properties.
Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.
Freestanding product that is placed directly on the ground.
Products in varnished pine must be maintained regularly with alkyd paint. Maintenance intervals approximately 1 time per year. Damage and cracks should be repaired immediately. Touch-up paints in spray packaging are available in standard colors to order.
Oiled oak should be oiled twice a year for best protection. Good maintenance can never completely prevent stains from occurring, but oak that is not maintained will turn blacker and turn gray faster, but it still has a very long life. When re-oiling products, a finely boiled oil that penetrates the wood should be chosen over a film-forming oil. Black stains on oiled oak can be removed with oxalic acid.
Oiled mahogany should be oiled two times a year.
Jotoba basically requires no maintenance apart from regular wiping down.
Maintenance on aluminium is not normally needed, but make sure to wash and keep the material clean. Untreated aluminium develops a matte surface over time.
Products that are powder-coated can be touch-up painted with alkyd paint.
The Frank furniture series makes a straightforward statement. Each of the three designs is strongly contemporary while able to complement traditional settings. The products are accessible and inclusive, offering higher seats and longer armrests to provide support for those less able. Crafted in recyclable sand-cast aluminium, Frank combines sustainability and style.