Kebne

Length: 210 cm
Width: 140 cm
Height: 240 cm
Vikt: 43 kg

Fall height: 140 cm

Ö72-10Kebne unit 1

Ö72-16NAttachment mountings 4 pcs/ set, ABOVE ground level

Ö72-16MAttachment mountings 4 pcs/ set, BELOW ground level

Ö72-SIGN 1Signprint for unit 1

Ö72-15Sign with metal plate

Append to product number

N för Surface mount.
GR for grey RAL 7016 antracit
GUL for yellow RAL 1023
VR for red RAL 3009
C for any colour, start up fee.

RAL 7016

RAL 1023

RAL 3009

Steel

Nola uses high-quality steel of good strength in our products. Steel rusts if left untreated and must therefore be surface treated. For this we use two main methods for surface treatment of steel parts; electrogalvanizing and powder coating as well as hot-dip galvanizing.

Accoya

Accoya® wood is the result of more than 80 years of research and development into modifying wood through an acetylation process. Accoya® wood is Radiata pine, a fast-growing wood virtually free of knots that is harvested from renewable FSC-certified forests. Accoya® wood has properties that match or exceed those of tropical woods and the treatment process is non-toxic. The pale wood will turn grey over time and may develop dark spots over time. Accoya® can withstand humid and rainy environments very well and expands/contracts less than other tropical-type woods.

Electrogalvanized

Electrogalvanizing (also known as zinc plating) provides corrosion protection through the sacrifice of zinc ions. It is created via a zinc coating on the steel using an electric current.

Powder coating

Powder coating is a coating that is applied as a free-flowing, dry powder. Unlike conventional liquid paint, powder coating is usually applied electrostatically and then cured under heat or with ultraviolet light. The result is an even, hard-wearing coloured surface with the desired gloss level.

Surface mount

Can be bolted above ground, to the floor or to a cast-in-place foundation. Bolts not included.

Installation in pre-cast foundations

Posts for installation in pre-cast foundations.

Knock down system.
Bolts to the ground with screws (not included in the delivery).
When assembled and fixed into the ground (need to be mounted to foundation 20 cm under ground or above ground).
Fall height unit 1: 140cm

The frames can be attached to almost any surface material or cast in concrete, with room for a layer of cushioning to be added underneath. When assembled and fixed into the ground (need to be mounted to foundation 20 cm under ground).

Accoya

Accoya is maintenance-free and does not require any special treatment to preserve its unique properties. If black spots should appear on the wood from pollution in the air, these are easily removed with any kind of furniture wash.